How to read a marketing report: the five numbers a contractor should check every month
Check five numbers every month: how many leads came in, what each lead cost, how many turned into booked jobs, what each booked job cost, and how fast your team replied. If your report does not show those five, or shows them without the dollars spent next to them, you cannot tell whether the marketing is working. Clicks, impressions and reach are useful to the person running the ads, not to the owner paying for them.
1. Leads, counted the same way every month
A lead is a person who asked for something: a call, a form, a message, a booked estimate. Not a click and not a visit. Ask your agency how they count it and make sure spam, wrong numbers and repeat calls from the same person are taken out. The number should match what your office saw. If the report says 60 leads and your phones and inbox saw 35, find out why before reading anything else.
2. Cost per lead, by channel
Divide what you spent on a channel by the leads it produced. Do it for each channel on its own: Google Search, Local Services Ads, Meta, and anything else you pay for. A blended number hides the channel that is wasting money. Industry ranges are wide. Roofing leads commonly run $40 to $150 on Meta and $150 to $400 on Google Local Services Ads, and HVAC leads commonly run $50 to $200 on Google Search. Your own trend matters more than the range. A cost per lead that climbs three months in a row is a problem even if it is still inside the range.
3. Booked jobs, and the close rate
Leads do not pay the crew. Count how many leads became a signed job and divide by the number of leads. That is your close rate. If leads are up and booked jobs are flat, the problem is usually lead quality or follow-up, not the ads. This number has to come from your side, from the CRM or the office, so someone has to mark each lead as won or lost. It takes a few minutes a week and it is the difference between knowing and guessing.
4. Cost per booked job, against what a job is worth
Divide the month's spend by the jobs you booked from it. Then put it next to your average job value and your margin. Paying $400 to book a $900 repair is a bad month. Paying $400 to book a $14,000 roof is a good one. This is the number that tells you whether to spend more, and it is the one most reports leave out because it needs your sales numbers.
5. Speed to lead
How long did a new lead wait for a real reply. Not an auto reply. If the answer is hours, you are paying for leads and handing them to the company that called back first. A good report shows the average response time and the share of leads reached the same day. If your report cannot show it, the leads are probably not landing in one system with a time stamp.
What to ignore, and what to ask
Impressions, reach, clicks and click rate tell the ad manager whether an ad is doing its job. They do not tell you whether the business is. Read them last, if at all.
Ask three questions every month. What changed since last month and why. What are you going to do differently next month. What would you stop paying for if it were your money. An agency that reviews the numbers will have an answer to all three.
Who owns the numbers
You should be able to log in and see all of this yourself: the ad accounts, the analytics and the CRM, in accounts that belong to your company. If the only place the numbers exist is a PDF the agency sends you, ask for access. If the answer is no, that is the real finding of the month.
Questions people ask next
How often should I get a marketing report?
Monthly is the right rhythm for decisions. Weekly numbers jump around too much to act on, though a short weekly note on leads and spend is useful.
What is a good cost per lead?
It depends on the trade, the channel and the job size. Common industry ranges run from about $30 to $200 for most home service leads, higher for Local Services Ads in roofing. Judge it against what a booked job is worth to you.
My report only shows clicks and impressions. Is that a problem?
Yes. Those numbers cannot tell you whether the spend produced work. Ask for leads, cost per lead and booked jobs, and give the agency your won and lost results so they can report it.
What if I do not have a CRM?
Then start with a simple list: every lead, the date, the source and whether it was won. Even a shared spreadsheet gives you close rate and cost per booked job. A CRM does the same thing automatically and adds response times.
Should the agency or the owner track booked jobs?
The owner's side has the answer, because the sale happens there. The agency should make it easy, with a pipeline where each lead is marked won or lost in one tap.
Related: Roofing marketing · HVAC marketing · Remodeling marketing · Concrete marketing
Proof from clients
More guides
Speed to lead for contractors: how fast to call back and what it changes
Call a new lead back within five minutes, and text them within one.
Read the answerGoogle Local Services Ads for roofers: setup, cost and what to expect
Google Local Services Ads put your roofing company at the very top of Google with a Google Verified badge, and you pay per lead, not per click.
Read the answerHow much does roofing marketing cost?
Most growing roofing companies spend 5 to 10 percent of revenue on marketing.
Read the answerWant this handled for your business?
Book a free 45-minute call. We look at your numbers and tell you what to build first, whether or not you hire us.